BQVTF - TONER (TK-2) FOR KYOCERA LASER PRINTER
- MSDS: BQVTF
- Manufacturer: KYOCERA CORP
- Product Name: TONER (TK-2) FOR KYOCERA LASER PRINTER
- National Stock Number: 6850-00N037414
Product Identification
Product ID:TONER (TK-2) FOR KYOCERA LASER PRINTER
MSDS Date:11/07/1991
FSC:6850
NIIN:00N037414
MSDS Number: BQVTF
Responsible Party
WATARAI-GUN MIE-PREF. 519-04, JAPAN
Emergency Phone: 0596-58-4114;510-748-6666
Info Phone: 0596-58-4114;510-748-6666
Preparer: A. KANEKO
Cage: S7506
Contractor
Telephone: 0596-58-4119 / 770-623-2150
Cage: S7506
Ingredients
STYRENE BUTYLACRYLATE COPOLYMER; (STYRENE/N-BUTYL ACRYLATE
Fraction By Weight: 54%
MAGNETITE; (MAGNETITE (FE*30*4))
CAS: 1309-38-2
RTECS: OM4800000
Fraction By Weight: 40%
POLYPROPYLENE WAX
Fraction By Weight: 5%
SILICA; (SILICA (SIO*2))
Fraction By Weight: 1%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN CONTACT: NON-IRRITATING.
NON-TOXIC. EYE CONTACT: DUST OF THE PRODUCT MAY CAUSE EYE
IRRITATION. INHAL: DUST OF PRODUCT MAY CAUSE LUNG IRRITATION.
RESULT OF AMES TEST WAS NEGATIVE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE FROM EXPOSURE.
EYE: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INGEST:
CONSULT A PHYSICIAN.
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:SWEEP UP/CLEAN WITH VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP IN A CLOSED PACKAGE.
Other Precautions:NO OTHER SPECIAL PRECAUTION FOR SAFETY REASON IS
NECESSARY.
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: PREFERABLE. MECH(GEN): ACCEPTABLE. OTHER:
NORMALLY NOT REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:PREFERABLE (INSTRUCTION FOR WORKERS).
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:284F,140C
Spec Gravity:1.5(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED/INCINERATED IN A
CLOSED PACKAGE UNDER THE CONDITIONS WHICH MEET FEDERAL, STATE AND
LOCAL REGULATIONS. (FOR PREVENTION OF DUST).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.